
A granny flat is one of the more predictable builds on a Sydney block, but the price still moves with the site, the services and the finish. This page explains what drives it and how to get a quote you can rely on.
Across Sydney, builders quote roughly $150,000 to $250,000 or more for a secondary dwelling built to the 60 square metre complying development limit and finished to a turnkey standard, with smaller studios below that range and difficult sites or high-end finishes above it. That is a market guide, not a Home Cor price. Home Cor Constructions prices every granny flat from the specific block, with an itemised quote that shows the allowances and exclusions, because two blocks that look the same from the street can differ by tens of thousands of dollars once the services and the ground are known.
If you want the number for your block rather than the market's, send the address and a sketch of what you have in mind, or read about our granny flat builds first.
In NSW a granny flat is a secondary dwelling. Many can be approved as complying development through an accredited certifier, which is usually faster than a development application, provided the lot meets the minimum size and frontage standards and the design meets the setback, height and floor area controls. Under those rules the dwelling is generally limited to 60 square metres internal floor area. Sites that do not fit the standards, including some heritage, flood and bushfire-affected lots, can still go through a DA with council, which takes longer and costs more in fees. BASIX applies either way. We confirm which path applies before any design is priced, because the path changes both the timeline and the cost.
We check the lot size, frontage, zoning, overlays and where the services run.
Family or tenant, one or two bedrooms, the level of finish, and where it sits on the block.
Every allowance and exclusion spelled out, so you can compare it line by line with any other quote.
CDC or DA, then slab, frame, roof, services, kitchen, bathroom and finishes by one builder.
A low headline price usually leaves something out: site works, service connections, the BASIX items, floor coverings, window furnishings, air conditioning, landscaping, or the certifier's fees. Ask every builder for the same scope in writing and compare the exclusions, not the total. Ask who will be on site running the job, how variations are priced, and whether you can see a completed granny flat. Home Cor's director runs every build and prices variations in writing before the work happens. For the wider picture on second dwellings, see duplex build cost and knockdown rebuild cost, and for where we build, Western Sydney and Sydney.
Across Sydney, builders quote roughly $150,000 to $250,000 or more for a 60 square metre secondary dwelling finished to a turnkey standard, depending on the site, the services and the finish. That is a market guide. Home Cor quotes from the specific block, itemised.
A Home Cor quote spells out what is included and excluded, so you can see the approval fees, the service connections and the site works. Compare any other quote on the same basis.
Under the NSW complying development rules a secondary dwelling is generally limited to 60 square metres of internal floor area. Larger designs can be considered through a DA.
Usually. A CDC through a private certifier is faster and involves fewer fees, but the lot and the design have to meet every standard. Sites that do not qualify go through a DA with council.
In NSW a granny flat can generally be leased separately, but it cannot be subdivided onto its own title. Confirm your plans with council or your certifier early so the design, access and metering suit a tenant.
Send through the address and what you have in mind. You will get a straight answer on whether the block can take a granny flat, which approval path applies and what it would cost, itemised.
0480 159 105admin@homecorconstructions.com.au